Interface after reading this SO using Traincontroller. When reading the SO using command XSOget (0xa4) the SO had to be recoded to Intellibox due to reconfiguration of the In the following table all default settings of version V0.15 are marked with an '*'.ĭefaults can be easily altered and are most likely subject to changes so please make sure to check all settings prior to use.Ī byte value to be interpreted as decimal, e.g. Respective configuration menu just for OpenDCC. Note that the OpenDCC configuration is extremely well integrated in rocrail which includes a (See also: Configuration using Trainprogrammer using a PC) Once in that mode, all programming commands (DCC bytewise) are routed to theĬommand station, i.e. The command station to enter the configuration mode. This requires to press the green "GO" button during startup of Access by programming the CVs of a "virtual" loco (V0.14 and higher).Respective menues available on the OpenDCC throttle. Or XSOset (0xa3) respectively XSOget (0xa4) in P50X-Binary-Mode.Ġx23 0x28 and 0x23 0x29 to read and write the command stations' CVs. Access using command SO (P50X-ASCII-Mode).The EEPROM contents is defined by config.h and config.c.
The variables kept in EEPROM can be set and modified using one of the following different ways: OpenDCC command station in order to make effective the changes. However, modification of those variables usually require a restart of the Persistent variables kept in the commands stations EEPROM. For more details and examples refer to config.h and config.h.Įach selected configuration provides for additional customizations which can be set and modified during operation using internal, Protocols like Intellibox, Lenz, S88, and DMX. Those parameters comprise, for instance, the internal memory size, command lists and the overall support for specific functions and
Possible adjustments and settings to be considered already during compilation usually are defined as parameters within the config.h. OpenDCC can be flexibly adjusted to personal user preferences during compilation as well as during runtime. OpenDCC Z1 configuration using Special Options (SO)
0 kommentar(er)
